Description
Overview
This American Thunder system is specially designed for 1967-1968 Camaro and Firebirds and is perfect for the person looking for a complete Crossmember-Back dual exhaust system. With an easy-fit in mind, this exhaust system is manufactured as a true dual exhaust using 2.50-inch aluminized steel tubing throughout, includes a built-in H-pipe design and delivers improved throttle response, power with a deep muscle car sound. The mandrel-bent tubing flows into a pair of Super 44 mufflers with 2.50-inch tailpipes exiting in the factory location behind the rear wheels pointing down just below the quarter panel. The system delivers a moderate to aggressive interior and exterior tone that’s suited for the enthusiast who wants their performance to be heard. Designed for an easy fit, these systems include all necessary parts, hardware, and instructions. If you prefer Stainless steel construction, check out optional system# 817129. Notes: Fits convertibles by spacing down the factory convertible body brace by approximately .375-inch, or you can replace the factory body brace with a Hotchkis Performance body brace part #1404.
Features
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Moderate to Aggressive Exterior Exhaust Tone
- Complete Crossmember-Back Exhaust System
- Super 44 Series Performance Mufflers
- Tailpipes Exit in the Factory Location
- Includes H-pipe Assembly
- Flowmaster Quality
Application
- Fits:
- 1967-1968 Chevrolet Camaro
- 1967-1968 Pontiac Firebird
- Engines:
- 4.9L V8 302 CID
- 5.3L V8 326 CID
- 5.3L/5.4L V8 327 CID
- 5.7L V8 350 CID
- 6.5L V8 396 CID
- 6.6L V8 400 CID
- Fits convertibles by spacing down the factory convertible body brace by approximately 0.375-inch, or you can replace the factory body brace with a Hotchkis Performance body brace part #1404.
Kit Contents
- 2x Connector Pipe
- 1x H-Pipe Assembly
- 2x Muffler
- 1x Left Tailpipe
- 1x Right Tailpipe
- 1x Hardware Kit (38 pieces total)
- 1x Instructions
Specs
| 2WD/4WD | 2WD |
| Brand | Flowmaster |
| Clamping Type | U-Bolt |
| Clamps Included? | Yes |
| Exhaust Series | American Thunder |
| Exit Position | Dual Side Exit |
| Finish | Aluminized |
| Hangers Included? | Yes |
| Heat Shield | No |
| Inlet Diameter (in) | 2.5 inch |
| Main Piping Diameter | 2.5 inch |
| Material | Aluminized Steel |
| Muffler Body Height | 4 inch |
| Muffler Body Length | 13 inch |
| Muffler Body Material | Aluminized Steel |
| Muffler Body Shape | Oval |
| Muffler Body Width | 9.75 inch |
| Muffler Finish | Black High-Temperature Paint |
| Muffler Part Number | 942546 |
| Muffler Quantity | 2 |
| Muffler Series | Super 44 Series |
| Muffler Type | Chambered |
| Outlet Diameter (in) | 2.5 inch |
| Product Type | Exhaust System |
| Single/Dual | Dual |
| Sound Level | Moderate/Aggressive |
| System Type | Crossmember-back |
| Tail Pipe Quantity | 2 |
| Tip Quantity | Not Included |
| Tubing Diameter (in) | 2.5 inch |
| Part Number | 17129 |
Emissions
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
